|Photo: M. Campbell|
Friday, 28 April 2017
Monday, 24 April 2017
Sunday, 23 April 2017
Friday, 21 April 2017
Would there be a pole and how high and how many insulator arms?
Wednesday, 19 April 2017
Tuesday, 18 April 2017
The instructions are the usual exploded diagram and a few scrap shots to back up. There is also a list of instructions 'Add part 1 to part 2' etc. This is all well and good and each part is sensibly numbered on this sheet. However this is where the planning stops as none of the actual bits are numbered on the parts or on the sprues making the whole text instruction completely superfluous. Shame. You are therefore left to identifying the parts off the diagram only. This may have changed on later batches of the kit, but is slowing things down a little here.
Cabin basically done though, and probably time to paint before the card interiors go in and the glazing is added.
Saturday, 15 April 2017
Thursday, 13 April 2017
61" x 47" is too big for the car to get it to him so it needed to be split. It also needed to be robust enough to be dragged around, but light. I decided that a semi-traditional softwood frame would give the strength with an MDF top rather than chipboard. It's a bloody awkward size and needed three 2'x 4' sheets to complete. The softwood is best B&Q banana pine which is still deciding what sort of shape it wants to be. Thus I had to dance about a bit to pick out the best sections for the outer and the worst for the bracing. The two boards will be bolted together with a brace of 6mm roofing bolts at their final destination. The final cost of just the materials being more than the train set...
We'll see how long this curve lasts.
Wednesday, 12 April 2017
Which brings me to a question: Were single line tokens given in at termini, or retained by the crew for the return trip? A simple thing which I should know, but don't.