Thursday, 26 February 2015
Monday, 23 February 2015
It has a three in it.
Been busy... no I'm lying; not busy at all. With Mrs F. on half term things get...well, disjointed. Meals get organised, wine gets drunk and all of a sudden the food shopping is the most important part of the day, whereas if I'm doing it, I'll organise it round a far more interesting trip to the dump. Apparently broken bricks, garden waste and food don't mix in the boot.... I've never noticed a problem before. She did though press a crisp tenner into my hand and send me off to the Tonbridge show while she explored the multitude of charity and 99p shops the town has to offer. Or maybe was it that we'd got to Saturday and she'd had enough of my engaging wit and repartee. We'll never know.
What I have done, partly as a bit of a dodge, is photo stuff. Mrs F. senior turned up to help the afore mentioned to wallpaper the lounge. That's two of them. I flatly refuse to wallpaper, doubly so in an 80 year old house with not one right angled wall in it. Dancing round the lounge with 7' of sticky tear-able soggy paper is something which seems completely illogical when paint goes on twice as fast and is half the money. So I hid. And as part of the 'big tidy' I sorted through photos.
When pictures came on nice easily manageable rolls of 36 they were sort of do-able. Now I have million gig memory cards which seems to store all this stuff that I can't remember taking. So three of these needed looking at. While I was sorting and burning onto CD, I thought about chucking some of them onto a Flickr account that I'd opened last year. There's still a long way to go.
Monday, 16 February 2015
Seen at the Salisbury show. I'm guessing that it folds or the legs slot in to the ends for transport, but even if they don't, its very neatly done and all properly jointed. Note the mains sockets and 12v power all plumbed in.
Everyone should have one.
Saturday, 14 February 2015
The faded white of my Argos work bench is 70% visible now. Pecketts have been painted and F&B coaches have had roofs covered in bog paper and couplings fitted. Now I'm in full flow with the relative bulk of the diesel. This is a bit of a jump even from the 7mm stuff and it's only a tiny loco.
I'm entering a modelling phase. Odd? There's a difference. Layout building is a set of ordered projects that are of a one and have a natural sequence: Baseboard, track scenery, buildings trees etc. Modelling is something smaller - contained. The above are an add on for Tal-coed and a little trial piece - not related and no specific reason... they just are. This is quite freeing. There is no deadline as such and I definitely don't need them. There are a lot of these in the cupboard; things that could be made just for the hell of it: 4mm wagon kits, signal kits even a Airfix Victory which I would insist on painting 'in service' black rather than the pretty stripes.
And so the tidy up continues, just for a while, just until I can see the bench again.
Wednesday, 11 February 2015
Morton Stanley has been stood on its end and put to one side for a moment while I clear a few things and re-organise. So why is there a baseboard photo? Well, the old trimmed Rhiw boards had been sitting in the garage for six months getting all cold so I thought it was time to get them in, warm them up, give them some hot soup, and take a look at what I could do. A little track has been dumped on and moved about to see how it looks, but first they need a damn good clean and sand -down. There's still quite a bit of ballast/glue residue on the flat bit and the 'sky' will need sanding and re-painting. And that's just the start.
The desk has been partially cleared of debris and work done on the 009 F&B coach and the second Peckett for Morton Stanley has been 90% dry-brushed weathered just to tone it all down. Only the cab roof needs attention and some plates sourced. The biggest item to shift is the IPEng based 16mm diesel, this is primary this week.
Monday, 9 February 2015
And now? Well there are tidy up bits on the bench; in fact I could spend the rest of the year just doing tidy up bits. Without leaning in any direction I can reach an 009 coach (actually plural) an EM Y6, a 16mm diesel, some fencing for Tal-coed, Langley cow-catchers to go on an 009 railcar and something in 3mm. That's just what's on the bench; lean 6" to either direction and the whole world opens up into a modelling vista.
Just send me paint, glue and commissions.
Friday, 6 February 2015
1. If you run AoC as it is (see plan below) then it is only possible to run one train in at a time as it's not possible to hold both the train AND the loco in the loop. Max complete train length is 27" (Pannier and B-set). In an ideal world I would want to run one in before one departs.
2. If that is changed and you look at an absolute max of 5-6 points on the board then you end up with one of three shapes: a) the Gammon End - loop and a siding off each end (Edge the last 009 piece, or Svanda above, start from this point)
b) Seaton - platform with release road and one or two siding roads/bay behind platform. Mr Parker has used this for Edgeworth. Which is also the classic light railway plan.
Or c) Ashburton. With the kick-back off of the bay. What these give you are a longer platform road that will hold the entire train - passenger waits in platform road, goods arrives loop etc. You can add odd sidings here and there, but remember there's only 6x1' to play with and if you are not careful it becomes all pointwork.
Goods only is a different proposition. CP's Sutton Wharf is smaller in size and is a lot busier track-wise, but he ain't trying to run round 27" of passenger train. Going freight only is another possible.
3. Any of the above will work and improve the density of traffic, but then as the Irishman on the horse replied when asked directions, 'If I wanted to go there, I wouldn't want to start from here.' The plan has now ceased to be AoC - you are now starting from scratch.
Tuesday, 3 February 2015
Firstly have a look at these; Swansea docks sidings over a long period. Lovely.
I guess most people would buy a seat. I needed a bench to stick at the side of the station building on Morton Stanley. Nothing too ostentatious, just a simple rural seat that would have been knocked up out of old bits of fencing or similar. 15 mins and some scrap 60thou 28mm long, 8mm high and hacked at with a craft knife. Two triangular fillets stop our tubby gent crushing the whole thing.